Murata commercializes low-power Wi-Fi®/Bluetooth® combo module:Helping proliferate battery-powered IoT equipment

发布时间：2024-06-28 11:31
作者：AMEYA360
来源：Murata
阅读量：904

　　Murata Manufacturing Co., Ltd. (hereinafter, “Murata”) has developed and begun mass-producing the low-power compact wireless module “Type 2GF” (hereinafter “this product”) with built-in Infineon Technologies (hereinafter “Infineon”) “CYW43022” Wi-Fi®/Bluetooth®/Bluetooth® Low Energy combo chip.

　　With the expansion of applications in the IoT market in recent years, there has been a rise in IoT equipment with wireless communication functions. There has been a diversification in the different specifications wireless communication functions need to have depending on the application. For battery-powered devices, wireless communication functions are also being required to have lower power consumption.

　　In response to this demand, Murata has applied proprietary wireless design technology and product processing technology to develop this product with CYW43022 built in to have low power consumption capabilities. Because CYW43022 can maintain connectivity even when a host processor is in sleep mode due to its connectivity processing capability with the chip’s Bluetooth® stack and Wi-Fi® network offloading, the chip helps this product consume less power at the system level. Space was also saved on the module by using often space-occupying noise shields in a smaller size, which allowed us to make this product more compact.

　　Specifications

Murata commercializes low-power Wi-Fi®/Bluetooth® combo module:Helping proliferate battery-powered IoT equipment

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

上一篇：400mA, High Output Slew Rate: NOVOSENSE's NSOPA240x Series Cracks the Challenge of Resolvers

下一篇：ROHM Develops a Novel VCSELED™ Infrared Light Source that Combines Features of VCSELs and LEDs

在线留言询价

相关阅读
Murata：SCH16T-K20 High-Precision 6-Axis IMU for Robotics and Camera Systems
Trade news

Murata：SCH16T-K20 High-Precision 6-Axis IMU for Robotics and Camera Systems

　　Murata Manufacturing Co., Ltd. has announced the expansion of its SCH16T series of high-performance inertial measurement units (IMUs) with the introduction of the SCH16T-K20, targeting industrial, prosumer, and consumer markets worldwide. Designed for OEMs in robotics, drones, and camera systems, as well as IMU module manufacturers and system integrators requiring safety-critical IMUs, the SCH16T-K20 delivers market-leading precision, mechanical robustness, and reliability.　　In demanding inertial measurement applications such as dead-reckoning navigation as well as drone and camera stabilization, small measurement errors can accumulate over time leading to unpredictable measurement results. In these applications, key IMU parameters such as noise density, offset bias drift, and vibration rectification ultimately limit the end-application performance and achievable response speed. Murata improves all the key areas with the new SCH16T-K20, which features a brand-new MEMS accelerometer and improved gyroscope temperature calibration.　　The SCH16T-K20 is a 6 axis IMU with a typical gyroscope noise density of 0.0004 (°/s)/√Hz, gyroscope bias instability of 0.3 °/h, and accelerometer noise density as low as 33 µg/√Hz. Like all other SCH16T products, the SCH16T-K20 has a wide operating temperature range from -40 °C to +110 °C, a supply voltage of 3.0–3.6 V, and I/O voltage of 1.7–3.6 V, and a compact size of 0.46 × 0.53 × 0.11 inch (11.8 × 13.4 × 2.9 mm).　　The driver behind the SCH16T-K20 accelerometer performance improvement is the brand-new accelerometer MEMS based on Murata’s proven 3D MEMS technology. The new MEMS uses a double-differential measurement principle, familiar from current SCA3400 and legacy SCA103T series sensors. The double differential measurement enables SCH16T-K20’s market leading low noise density, as well as thermal and lifetime stability.　　The SCH16T-K20 also includes an enhanced version of the market-leading low-noise SCH16T gyroscope, now tuned specifically for the -40 °C to +85 °C temperature range to enable low offset bias shift across that range. All SCH16T series products are carefully validated with a test set based on AEC-Q100 operating temperature Grade 1 (-40 °C to +125 °C) standards*, ensuring reliable operation over a wide temperature window. The series sensors include market-leading self-diagnostic features, making them suitable for safety-critical applications. Murata’s unique MEMS stands out in the competitive IMU market for its exceptional mechanical resilience to shocks and vibration rectification. The series’ robust design and reliability contribute to longer device lifespans and reduced waste.　　The SCH16T-K20 becomes the highest-performing variant in the SCH16T lineup while maintaining pin-to-pin and software compatibility. This compatibility makes integration of different SCH16T variants easy for OEMs and module designers. Mass production of the SCH16T-K20 is scheduled to begin in the first half of 2026. Murata will continue developing sensor solutions aligned with evolving market demands, contributing to safer, more sustainable, and higher-performing technologies across industrial and consumer markets.
2025-12-26 16:09 阅读量：342
Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization
Trade news

Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization

　　Murata Manufacturing Co., Ltd announces the World’s First LCP (liquid crystal polymer) flexible substrate with an Inner Cavity structure, ULTICIRC, and has already begun mass production*. Murata’s proprietary design incorporates an Inner Cavity within the substrate to achieve a dielectric constant (Dk) below 2.0, dramatically reducing transmission loss.Cross-Section Image　　With 6G expected to leverage the FR3 (Frequency Range 3) band—roughly 7–24 GHz—substrates with minimal transmission loss are essential to enable high-speed, high-capacity communications at high frequencies. At the same time, demand is growing for thin, space-saving flexible substrates that support free-form mechanical design to meet the ongoing miniaturization of smartphones and communication equipment. Murata has provided LCP flexible substrates with excellent high-frequency characteristics, featuring a proprietary high-performance resin that eliminates spring-back and an adhesive-free, one-shot press multilayer lamination process; building on this expertise for 6G readiness, Murata has developed and launched ULTICIRC. Conventional flexible substrates faced the challenge that making them thinner resulted in increased transmission loss, but this product incorporates an Inner Cavity structure within the substrate, achieving a dielectric constant (Dk) below 2.0, which is significantly lower than Murata's conventional products, enabling both thin profiles and ultra-low transmission loss simultaneously.　　Furthermore, thanks to an adhesive-free proprietary manufacturing method and the excellent barrier properties of LCP, the Inner Cavity structure maintains high moisture resistance.　　For inquiries regarding this product, please contact us.
2025-12-18 16:00 阅读量：474
Murata develops integrated passive device for Semtech’s SX126X family
Trade news

Murata develops integrated passive device for Semtech’s SX126X family

　　Murata Manufacturing Co., Ltd. has developed a new integrated passive device (IPD) for use with the Semtech LoRa Connect™ SX126x family, which includes the SX1261, SX1262, and LLCC68 products. Using a proprietary low-temperature co-fired ceramic (LTCC) process, Murata has successfully replaced a series of discrete matching components of the SX1261/2 reference design with a single 2.00mm x 1.25mm size LTCC component.　　The IPD enables SX1261/2 radio designers to optimize for both size and performance using two dedicated parts. The LFB21892MDZ7F957 is optimized for US and European ISM bands, delivering the full output power for the US FCC bands. The LFB21892MDZ7F821 is optimized for Eurocentric designs that need to maximize the efficiency performance.　　“The Murata IPD offers the most efficient development path to realizing the full performance of the SX1261/2, featuring a miniaturized form factor that can significantly reduce board space,” says Arthur Kiang, Product Manager, RF Components, Murata. “The reduction in the number of matching components enables lower material costs and simplifies the design process, leading to shorter lead times. This integration also lowers the probability of soldering and manufacturing issues, as there is only one component to monitor in production.”　　“Semtech’s LoRa Connect™ SX126x family has become the trusted choice for LoRaWAN® networks and long-range IoT connectivity in applications from smart metering to industrial sensing,” says Carlo Tinella, product marketing director of wireless and sensing products at Semtech. “Murata’s IPD solution demonstrates the strength of our LoRa® ecosystem, helping radio engineers accelerate development while optimizing for both miniaturization and regulatory compliance. This partnership streamlines the path from design to deployment for millions of IoT devices being deployed globally.”　　Product samples are currently available, with mass production of the IPD commencing shortly.
2025-11-28 17:33 阅读量：490
Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces
Trade news

Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces

　　Murata Manufacturing Co., Ltd. (hereinafter ‘Murata’) has added a high cutoff frequency*1 product to its lineup of noise suppression components, the 0504-inch size (1.25 x1.0mm) chip common mode choke coils ‘‘DLM11C_HH2 Series’’ (hereinafter, ‘the product’), suitable for automotive high-speed differential interfaces such as LVDS*2, SerDes*3, USB, and HDMI. Murata has already started mass production of this product.　　*1High cutoff frequency: Reduces high-frequency noise.　　*2LVDS (Low Voltage Differential Signaling): An interface used for LCD panels.　　*3SerDes (Serializer/Deserializer): Circuits that convert between the serial and parallel signals in each direction.　　In recent years, the automotive market has seen multiple USB ports installed in each vehicle seat as interfaces for connecting smartphones and PCs, and data transfer speeds have increased from conventional USB 2.0 to Gbps-class USB 3.2. For these differential interfaces, common mode noise suppression is essential, and small common mode choke coils that support high-speed signals are required. In response, Murata developed this product using proprietary lamination technology to reduce high-frequency noise above 7.5 GHz in a compact 0504-inch size.　　Specifications　　*4AEC-Q200: One of the standards defined by the Automotive Electronics Council (AEC).
2025-11-10 17:12 阅读量：529
热门分类
盒子，外壳，机架 电缆，电线 电路保护 连接器，互连器件 开发套件 机电产品 嵌入式解决方案 风扇，热管理 光电元件 其它 无源元件 电源 半导体 传感器，变送器 测试与测量
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
RB751G-40T2R ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
TL431ACLPR Texas Instruments
MC33074DR2G onsemi
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
IPZ40N04S5L4R8ATMA1 Infineon Technologies
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
原厂授权品牌
更多授权品牌>>
资讯排行榜
  • 周排行榜
  • 月排行榜

相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年，现 有超过3500家优质供应商，收录600万种产品型号数据，100 多万种元器件库存可供选购，产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等，为广大客户提供一站式购 销服务。

请输入下方图片中的验证码：

验证码