• Ameya360 Component Supply Platform > 
  • Trade news > 
  • New Murata Power Solutions Product Designed to Meet the Latest Demands of Wireless Infrastructure Equipment Including RFPAs, 5G Base Stations, and Wireless Repeaters

New Murata Power Solutions Product Designed to Meet the Latest Demands of Wireless Infrastructure Equipment Including RFPAs, 5G Base Stations, and Wireless Repeaters

Release time：2023-10-11
author：AMEYA360
source：Murata
reading：1935

　　Murata Power Solutions today announced a new product for growing telecommunications and networking equipment needs. The MPQ600 was designed to enable hardware engineers the flexibility to meet demanding RFPA (Radio Frequency Power Amplifier) system design goals. The solution features a Vin range of 36-75Vdc, a Vout range of 14V to 35V, and offers 96.5 percent efficiency. It was developed specifically for powering wireless infrastructure equipment such as RFPA, 5G base stations, wireless repeaters, distributed antenna systems, industrial (robotics, transportation, digital signage, communications), infrastructure point-to-point radios, networking equipment, public safety wireless equipment, and test and measurement equipment.

New Murata Power Solutions Product Designed to Meet the Latest Demands of Wireless Infrastructure Equipment Including RFPAs, 5G Base Stations, and Wireless Repeaters

　　Additional features include remote on/off control, remote sense and trim functions, input under voltage, over-current, over temperature, and short circuit protection. Additionally, the MPQ600 module features a PMBusTM interface that can be used to monitor input and output voltages, output current, and device temperature. The PMBusTM also allows users to configure many operational parameters including output voltage, current limit, Vout ramp rate, Vout delay, soft start/stop and optimization of the modules for stable operation under a wide range of conditions.

　　The solution was designed, tested, and qualified according to the industry standard IPC9592 design for reliability requirements. Electrical performance is state-of-the-art with an efficiency rating of 96.5+ percent typical at full load, Pre-Bias protection under all conditions, and tight line and load regulation. The MPQ600 has low output ripple and noise and fast load transient response all packaged in an industry standard quarter brick package measuring just 58.4 x 36.8 x 14.4mm (2.3 x 1.45 x 0.57 in). All I/O isolated MPS modules are designed and comply with IEC/EN/UL 62368-1 safety standards.

　　“Murata Power Solutions is proud to offer the MPQ600-28V21-D48NBMC modules to power systems architects around the world. We employ a highly rigorous reliability design and manufacturing process, advanced digital control platform with Murata’s proprietary firmware, providing the power system designer the tools for the next generation, high performance systems,” said Bill Smith, Sr. Product Manager, Murata Power Solutions.

（"Note: The information presented in this article is gathered from the internet and is provided as a reference for educational purposes. It does not signify the endorsement or standpoint of our website. If you find any content that violates copyright or intellectual property rights, please inform us for prompt removal."）

Previous：What is a mica capacitor? Why are mica capacitors used?

Next：What is a wire wound resistor? How wire wound resistors are made?

Online messageinquiry

reading
Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications
Trade news

Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications

　　Murata Manufacturing Co., Ltd has launched a digital output SMD pyroelectric infrared sensor, IRS-D200ST00R1, with low power consumption and is already in mass production.　　In recent years, the use of IoT technology in smart homes and smart buildings has increased convenience, safety, and power saving within living spaces and facilities. Because of this, the demand for wireless communication units equipped with human detection functions capable of sensing movement in real time is also increasing to realize more efficient and comfortable environments. One of the key technologies to enable the motion detection function is a pyroelectric infrared sensor. Products which communicate wirelessly require long-term stable operation with reduced battery replacement or charging, thus creating a strong need for pyroelectric infrared sensors that can detect human movement while extending battery life. Additionally, to increase design flexibility inside these products, space-saving measures are essential, driving demand for compact infrared sensors., space-saving measures are essential, driving demand for compact infrared sensors.　　In response, we developed this product using proprietary pyroelectric ceramic technology to achieve low power consumption and a compact size. Even when continuously operating the human detection function, power consumption is kept low, and the sensor includes an interrupt function that activates the microcontroller only when a change is detected, contributing to extended battery life. Furthermore, the compact size enables space-saving, and the adoption of the digital I2C interface simplifies design during development.　　The main features of this product include contributing to overall system power reduction through low power consumption and interrupt functionality, space-saving due to its small and low-profile SMD package, ease of design enabled by built-in amplifier and ADC with digital output (I2C), reduction of false detections and stable operation thanks to high signal-to-noise ratio and EMI noise resistance, Also enabling process cost reduction through reflow compatibility.　　Key specifications are a dual element electrode size of 0.08 × 0.02 inch (2.0 × 0.5 mm), an overall size of 0.24 × 0.24 × 0.10 inch (6.0 × 6.0 × 2.6 mm), typical sensitivity of 19.5 mV, element height of 0.065 inch (1.65 mm), field of view of ±55° horizontal and ±42° vertical, supply voltage from 1.8 to 3.3 V, typical current consumption of 8 µA, and an I2C interface.*
2025-09-15 14:09 reading：418
Murata Manufacturing Co., Ltd. expands lineup of isolated DC-DC converters for PoE IEEE802.3af
Trade news

Murata Manufacturing Co., Ltd. expands lineup of isolated DC-DC converters for PoE IEEE802.3af

　　Murata Manufacturing Co., Ltd. has expanded its lineup of isolated DC-DC converters for PoE*1 with the launch of an IEEE802.3af-compliant isolated DC-DC converter for PD*2 (hereinafter, ‘the product’). Murata has already started mass production of the product, and samples are available upon request.　　*1PoE: Power over Ethernet. A technology that enables power supply over LAN cables used to build networks.　　*2PD: Powered Device. A device that receives power in a PoE system.　　PoE technology enables power supply over LAN cables used to build networks, improving installation flexibility, and reducing costs. In recent years, network-enabled devices such as security cameras and biometric authentication equipment have increasingly adopted PoE technology. Against this backdrop, demand for compact power modules for PoE-compatible devices is growing. In particular, biometric authentication devices typically require around 10 W of power, making the IEEE802.3af standard, which supports up to 15 W, an ideal match.　　Accordingly, Murata has developed this product compliant with IEEE802.3af. The product’s compact, low-profile design (1.02×0.58×0.27 inches (26×14.8×6.8mm)) enhances layout flexibility on circuit boards. It is mainly suited for camera modules and biometric authentication devices that require space-saving and low-noise characteristics, and contributes to the miniaturization of other communication devices.　　Key features　　Isolated DC-DC converter module compliant with IEEE802.3af Class specifications　　Compact and low-profile (1.02×0.58×0.27 inches (26×14.8×6.8mm)) for high layout flexibility　　Wide operating temperature range (-40°C to +85°C) for versatile applications　　Applications　　IEEE802.3af-compliant devices including wireless access points, biometric authentication devices, security cameras, camera modules, IP phones, and audio speakers　　Specifications
2025-09-08 15:11 reading：452
Murata Launches iSIM IoT Module with Built-In Global Connectivity from 1NCE
Trade news

Murata Launches iSIM IoT Module with Built-In Global Connectivity from 1NCE

　　Murata today introduced a new iSIM-compatible LPWA module, the Type 1SC, pre-integrated with out-of-the-box connectivity from 1NCE, one of the world’s fastest-growing IoT companies. The collaboration delivers simplified, scalable global connectivity, making it easier to launch and manage low-power IoT devices. Optimized for low-power, low-data applications, the solution comes bundled with 50 MB of data and optional top-ups, enabling rapid, cost-effective deployment for applications such as asset tracking, fleet management, and healthcare monitoring. Supporting both LTE-M and NB-IoT, the module offers broad compatibility across networks in 173 countries.　　By embedding 1NCE’s cloud-based connectivity directly into the module, Murata eliminates the need for separate SIM provisioning, streamlining the design and manufacturing process for compact, energy-efficient devices. The result is a faster, more reliable path to market. Additionally, with over 30 million devices managed across 23,000+ customers, its platform simplifies lifetime IoT connectivity – bringing seamless integration, global reach, and built-in scalability to the next generation of connected products.　　“Murata’s Type 1SC module represents our commitment to driving innovation in the IoT space,” said Hiro Hyogo, Senior Manager, Corporate Technology and Innovation at Murata Americas. “By having connectivity pre-installed on our modules, we’re reducing the complexities and costs associated with global IoT deployments while ensuring strong security and performance.”　　"IoT will be dominated by software players, which is why Murata chose and trusted in 1NCE," said Fabian Kochem, Head of Global Product Strategy at 1NCE. “The supply chain of IoT is bloated, but our two companies save our customers time and money.”
2025-08-13 15:33 reading：524
Commercialized the XRCGB_F_C Series In-vehicle Compact Crystal Unit in 2016 Size
Trade news

Commercialized the XRCGB_F_C Series In-vehicle Compact Crystal Unit in 2016 Size

　　Murata Manufacturing Co., Ltd. (hereinafter ‘Murata’) commercialized the ‘XRCGB_F_C’ series compact crystal unit (hereinafter ‘this product’) in 2016 size for in-vehicle infotainment (IVI*1) and other automotive applications. Mass production has already begun.　　*1In-Vehicle Infotainment (IVI): An automotive function that provides information and entertainment to the driver and passengers through an IT device mounted on the automobile.　　Most in-vehicle infotainment systems use 3225 size crystal units. In recent years, the growing demand for enhanced functionality in electronic systems—particularly with the integration of ADAS*2 — has led to an increased reliance on electronic components. This trend necessitates the development of even smaller electronic parts. Simultaneously, communications standards for in-vehicle systems are also advancing, which results in an intense wireless traffic of these individual devices. Under these circumstances, signal transmission timing must be accurately synchronized between in-vehicle device ICs in order to correctly receive electric signals on frequencies defined by different communications standards and avoid inter-IC communication errors. This therefore requires high-precision timing devices that generate stable clock signals.*3　　*2ADAS: Advanced Driver Assistance System.　　*3Clock signals: Signals transmitted at a stable cycle with certain intervals.　　To respond to this need, Murata developed this 2016-size product for in-vehicle applications, achieving both smaller size and higher precision thanks to our original packaging technique and design and process optimization. Compared to the 3225 size, the new product achieves about 60% reduction in implementation space, contributing to downsizing the device itself while offering enhanced functionality. This product also features powerful cracking resistance while soldering and is preferred by many customers for in-vehicle applications.　　We will continue to help bring safety and reliability to customers by expanding the use of highly reliable and high-performance crystal units.　　Product characteristics　　Compact 2016 size　　High precision　　Operating temperature 105°C guaranteed　　High resistance to cracks while soldering　　Highly reliable with a low failure rate (particle-less)　　Stable supply　　Lead-free
2025-07-23 13:16 reading：407
Popular categories
Boxes, Enclosures, Racks Cables, Wires Circuit Protection Connectors, Interconnects Development Kits Electromechanical Embedded Solutions Fans, Thermal Management Optoelectronics Others Passive Components Power Semiconductors Sensors, Transducers Test and Measurement
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
RB751G-40T2R ROHM Semiconductor
MC33074DR2G onsemi
CDZVT2R20B ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
TL431ACLPR Texas Instruments
model brand To snap up
ESR03EZPJ151 ROHM Semiconductor
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
BP3621 ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
Original authorized brand
More Licensed Brands>>
Information leaderboard
  • Week of ranking
  • Month ranking

About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 weixin Service Account AMEYA360 weixin Service Account
AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below：

verification code