Fab Tool Sales Decline for 4th Straight Month

Release time：2017-11-29
author：Ameya360
source：Dylan McGrath
reading：976

　　Sales of semiconductor manufacturing equipment declined on a sequential basis for the fourth straight month in October, but remained well ahead of last year's pace, according to the SEMI trade association.

　　The three-month average of billings for North American semiconductor tool manufacturers slid to $2.02 billion in October, down 1.8 percent compared with September, SEMI said. However, billings were 23.7 percent the October 2016 figure, SEMI said.

　　The equipment market is on pace for a record year with sales of greater than $50 billion. SEMI said in July it expects sales to be up nearly 20 percent this year, but growth since then has pushed the number higher. The trade group has previously predicted that the market would grow another 8 percent in 2018.

　　“In spite of this seasonal weakness, we expect equipment spending to increase by 30 percent or more this year and are positive about growth in 2018," said Ajit Manocha, SEMI president and CEO, in statement.

　　Meanwhile, the Japan Semiconductor Equipment Association (SEAJ) reported that the three-month average of billings for Japan-based semiconductor tool vendors was $1.55 billion in October, down 2.8 percent from September but up 18.3 percent compared to October 2016.

（"Note: The information presented in this article is gathered from the internet and is provided as a reference for educational purposes. It does not signify the endorsement or standpoint of our website. If you find any content that violates copyright or intellectual property rights, please inform us for prompt removal."）

Previous：South Korea Takes Bigger Slice of Mobile DRAM Market

Next：CEA-Leti Moves Fast on New CEO

Online messageinquiry

reading
Fab Tool Billings Fall for First Time in 2 Years
Trade news

Fab Tool Billings Fall for First Time in 2 Years

Billings among North American manufacturers of semiconductor production equipment posted a year-over-year decline last month for the first time in two years as the fab tool market continues to cool after two years of white-hot growth.The three-month rolling average of billings for North American chip equipment firms slipped to $1.94 billion in November, down 4.2% compared to October and down 5.3% compared to November 2017, according to the SEMI trade association.“For the first time in over two years, billings of North American equipment manufacturers are down relative to the same month the year before,” said Ajit Manocha, president and CEO of SEMI, in a press statement. “After reaching historical revenues earlier this year, billings activity is decelerating in line with weaker growth expectations for 2019.”November marked the first time that fab tool billings declined on a year-over-year basis since May 2016.Despite slowing growth in recent months, global sales of semiconductor equipment are expected to set an all-time high for the second-straight year in 2018. SEMI recently forecast that global semiconductor equipment sales would grow 9.7% this year to reach $62.1 billion before declining by 4% in 2019. The trade association also projected that tool sales would bounce back to grow more than 20% in 2020 to reach $71.9 billion.
2018-12-20 00:00 reading：1600
Fab Tool Sales Expected to Decline in 2019
Trade news

Fab Tool Sales Expected to Decline in 2019

 After what is expected to be a second-straight record sales year in 2018, the semiconductor equipment market is projected to decline by 4% next year before recovering to grow by more than 20% in 2020, according to the SEMI trade group.In its year-end forecast, released on Wednesday (Dec. 12) at the Semicon Japan trade show, SEMI estimated that fab tool sales will grow 9.7% this year to reach a record $62.1 billion. The forecast is consistent with other forecasts released earlier this year, despite slowing sales growth in recent months.But the forecast calls for tool sales to decline to $56.6 billion next year before rebounding to grow 20.7% in 2020, reaching a new record high of $71.9 billion.SEMI projects that the market for wafer processing equipment — the largest category of semiconductor production equipment — will grow 10.2% this year to reach $50.2 billion. The chip test equipment market is expected to grow by 15.6% this year to reach $5.4 billion, while the assembly and packaging equipment market is forecast to grow 1.9% to reach $4 billion, said SEMI.Semiconductor equipment market in billions of U.S. dollars. (Source: SEMI)South Korea — paced by continued record spending by Samsung Electronics — is expected to remain the largest regional market for fab tools for a second-straight year in 2018. China is expected to leapfrog Taiwan in 2018 to become the second-largest market for chip equipment, growing at a rate of 55.7%, said SEMI.For 2019, SEMI projects that South Korea, China, and Taiwan will remain the top three markets for chip equipment.
2018-12-13 00:00 reading：1397
Fab Tool Sales Slip to $15.8 Billion in Q3
Trade news

Fab Tool Sales Slip to $15.8 Billion in Q3

Global semiconductor equipment billings slipped to $15.8 billion in the third quarter, a 5% decrease from the second quarter, according to the SEMI trade organization. Billings improved by 11% compared to the third quarter of 2017.The third quarter marked the second straight quarter of sequential billings declines for the semiconductor equipment industry, which has been enjoying a historic run. Third quarter billings were down by 7% compared to $17 billion in the first quarter, the peak of the upcycle.SEMI said in July it expects chip equipment sales to hit $62.7 billion this year, an increase of 12% compared to the record high of $56.6 billion the industry set last year.
2018-12-05 00:00 reading：1245
Fab Tool Spending on Pace for Third Straight Record Year
Trade news

Fab Tool Spending on Pace for Third Straight Record Year

Spending on semiconductor capital equipment is on pace to set a new all-time high for the third consecutive year, led by strong sales in South Korea and China, according to the latest forecast by the SEMI trade association.The latest SEMI forecast calls for spending to rise 14 percent this year, reaching nearly $65 billion. Spending is forecast to rise an additional 9 percent next year to top $70 billion for the first time, SEMI said. The last time semiconductor equipment spending rose for four consecutive years was the mid 1990s.South Korea is expected to remain the top region for chip equipment spending in 2018. While Samsung Electronics is expected to reduce its equipment spending from its 2017 level of about $18 billion, Samsung is still expected to account for about 70 percent of the equipment spending in South Korea this year, according to SEMI. SK Hynix is expected to increase its equipment spending in South Korea this year, SEMI said.Meanwhile, China — which is expected to be the top region for semiconductor equipment sales beginning next year — continues its dramatic rise in fab tool spending. Equipment spending in China is expected to increase by 65 percent this year and by an additional 57 percent in 2019, SEMI said.SEMI noted that more than half of the semiconductor equipment spending in China in 2018 and in 2019 is expected to come from non-Chinese companies including Intel, SK Hynix, TSMC, Samsung and Globalfoundries. Domestic Chinese companies — backed by large government initiatives — are building a considerable number of fabs that are starting to equip this year and next year, according to SEMI. These companies are expected to double their equipment investments in 2018 and again in 2019, SEMI said.The trade group said other regions are also ramping up investment in semiconductor equipment, including a projected 60 percent increase in spending in Japan this year. Spending in Europe and the Mideast is expected to increase by about 12 percent, SEMI said, while growth in Southeast Asia is expected to be about 30 percent.
2018-06-14 00:00 reading：1298
Popular categories
Boxes, Enclosures, Racks Cables, Wires Circuit Protection Connectors, Interconnects Development Kits Electromechanical Embedded Solutions Fans, Thermal Management Optoelectronics Others Passive Components Power Semiconductors Sensors, Transducers Test and Measurement
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
MC33074DR2G onsemi
CDZVT2R20B ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
TL431ACLPR Texas Instruments
RB751G-40T2R ROHM Semiconductor
model brand To snap up
BU33JA2MNVX-CTL ROHM Semiconductor
TPS63050YFFR Texas Instruments
IPZ40N04S5L4R8ATMA1 Infineon Technologies
ESR03EZPJ151 ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
BP3621 ROHM Semiconductor
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
Original authorized brand
More Licensed Brands>>
Information leaderboard
  • Week of ranking
  • Month ranking

About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 weixin Service Account AMEYA360 weixin Service Account
AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below：

verification code