Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

Release time:2024-01-05
author:AMEYA360
source:Fibocom
reading:2338

  Introduction

  The latest statistic from GSA’s 5G Infographic reveals that as of August 2023, there were 265 commercial 5G launches globally, and 543 operators are investing in 5G network rollout. Driven by technological innovations, it is expected to add new 5G network deployments in more than 30 countries in 2023, most of which will be 5G standalone networks. While the operators are propelling the implementation of 5G infrastructure, the adoption of 5G applications will be presented in a more mature business model for consumers, and enterprises to engage in the beneficiary bandwidth and millisecond latency.

  Another statistic from GSA has identified 535 operators from 186 countries and territories are providing FWA service using LTE or 5G worldwide. These powerful figures also mark the stance of FWA as the "Killer App" in 5G's commercialization attributed to the rapid deployment in recent years.

  Why RedCap and How to Position the Role in the FWA Market?

  The evolution of 5G technology is an ongoing process, from 3GPP Release 15 to 17, every evolution empowers 5G with multiple advancements. RedCap was introduced under the category of 5G NR in 3GPP Release 17 but leveraged fewer 5G NR capabilities for the balance of 5G functions and costs. This new tier of 5G will technically contribute to the acceleration of the 5G use cases adoption rate by providing optimized hardware design, extended battery life, lower power consumption and better spectrum utilization.

Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  Source: Ericsson FWA Handbook 2023 Edition

  FWA (Fixed Wireless Access), is addressed to close the digital divide and offer fiber-like wireless connectivity services eliminating the barriers led by geography locations. 4G FWA has benefited from the comprehensive 4G infrastructure built in the past ten years, the shipment accounted for more than 70% of the total FWA device shipments. Driven by the implementation of 5G network deployments, 5G share is predicted to exceed 4G in the next few years, and the 4G existing market will seek for a 5G solution for smooth transition. Therefore, 5G RedCap is considered to be the ideal solution to take over the 4G FWA market with the multiple enhancements introduced at the beginning.

  Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  As the industry-leading provider of wireless modules and solutions, Fibocom launched the 5G RedCap module solution for the global FWA market earlier this year. Integrated with Snapdragon X35 5G Modem-RF, which is the world's 1st 5G NR-Light Modem-RF, Fibocom FG131 is a high-performance RedCap module with a maximum peak rate of up to 226Mbps on the downlink and 121Mbps on the uplink in 5G SA. Furthermore, it is also backward compatible with LTE networks, delivering up to 195Mbps downlink and 105Mbps uplink speed. Adopting an LGA form factor measured at 39.5*37mm, the package ensures the 100% compatibility of Fibocom LTE Cat 6 module series FG101 and FG621, and is also pin-compatible with Fibocom LTE Cat 4 module series, greatly reducing the barriers for customers to replace the 4G FWA devices with the latest 5G technology. Notably, FG131 incorporated numerous hardware innovations by employing a highly-integrated PCB layout, enabling customers' devices to support more frequency bands at a global scale, encompassing regions such as North America, Latin America, Europe, Australia, Japan, China, etc.

Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  The simplified design of the 5G RedCap module will ultimately lead to cost optimization. In hardware utilization, FG131 realize the balance of cost performance and end device scalability. Catering to the demand for larger bandwidth and higher throughput in the FWA scenarios, FG131 is equipped with a 1.25Gbps SGMII portal for users to develop the wired connection. Additionally, it expands wireless capability to Wi-Fi 5/Wi-Fi 6 by docking to QCA6174/WCN6856 Wi-Fi chipset via a PCIe 2.0 port. In terms of software comparability, FG131 supports OpenWRT, allowing customer who adapts Open CPU to develop the FWA end devices flexibly. Most importantly, Fibocom FG131 RedCap module shows no compromise on the 5G capability such as network slicing, 5G LAN, which is essential for specific use cases like private networks, industrial automation, mission-critical applications, etc.

  In Conclusion

  Among the plenty of capabilities outlined in the above chapter, 5G RedCap will shine as the spotlight in the FWA industry as it eases the way for customers to build a more competitive terminal based on the up-to-date 5G technologies. Fibocom has the confidence to provide the best-in-class RedCap module solutions to help our customer's FWA devices such as CPE, ODU, mobile hot spot, USB dongle adapt to the transition seamlessly.

("Note: The information presented in this article is gathered from the internet and is provided as a reference for educational purposes. It does not signify the endorsement or standpoint of our website. If you find any content that violates copyright or intellectual property rights, please inform us for prompt removal.")

Online messageinquiry

reading
MWC Barcelona 2025: Fibocom Launches Qualcomm X85/X82 5G Modem-RF-Powered 5G Modules, Enhancing FWA AI Capabilities
  Barcelona, Spain – March.4th 2025 - Fibocom (Stock code:300638), a global leading provider of AIoT solutions and wireless communication modules, announced the launch of its new 5G modules and solutions based on Qualcomm Technologies, Inc.s latest Qualcomm® X85/X82 5G Modem-RF. These new solutions are set to help industry customers seamlessly transition to next-generation Fixed Wireless Access (FWA) technologies and rapidly accelerate the commercialization of new platforms.  The latest Qualcomm X85/X82 5G Modem-RF delivers significant performance upgrades over the previous X75/X72 generation, including:  l Supports 3GPP 5G Advanced standards, enabling key 5G Advanced features.  l Enhanced NR Sub-6GHz downlink carrier aggregation (CA), upgraded from 5CA to 6CA, with carrier bands exceeding 400 MHz.  l Support for Intra-band ULCA (uplink carrier aggregation) TDD, boosting uplink data rates and optimizing network efficiency.  l Advanced software capabilities, supporting OpenWRT version 24.x, with compatibility for RDK-B and prplOS.  l Major AI advancements, including Modem AI functionality and support for external AI NPUs (Neural Processing Units).  Powered by a quad-core processor, new software suite, and several industry-leading innovations, Fibocom’s 5G modules deliver remarkable capabilities in network coverage, latency, energy efficiency, and mobility. Harnessing advanced AI capabilities, these modules drive 5G FWA solutions to an unprecedented level of intelligence.  These 5G modules support six-carrier aggregation in the NR Sub-6GHz downlink, offering bandwidth exceeding 300 MHz for faster transmission speeds and broader signal coverage. In addition, Intra-Band uplink carrier aggregation ensures faster data rates, optimizing overall network performance and addressing bandwidth-intensive applications like video conferencing, online gaming, and virtual collaboration.  In addition to hardware upgrades, the Qualcomm X85 Modem-RF introduces software innovations. The modules will support OpenWRT 24.x, a popular open-source router operating system known for robust features and scalability. Support for RDK-B and prplOS provides users with the flexibility to select the platform that best suits their needs.  The Qualcomm® 5G AI Suite and Qualcomm® Networking AI Suite combine to deliver QoS management and intelligently prioritized network traffic. These powerful AI Suite capabilities automatically identify high-priority tasks—such as streaming HD video or online gaming—and allocate necessary bandwidth, significantly enhancing the user experience.  “We are thrilled to collaborate with Fibocom on the launch of their new 5G modules and solutions, powered by our latest Qualcomm X85/X82 5G Modem-RF. Together, we are proud to set new benchmarks with solutions offering exceptional network coverage, low latency, energy efficiency, and enhanced mobility, ultimately paving the way for a more connected and efficient future,” said Gautam Sheoran, VP & GM, Wireless Broadband & Communications, Qualcomm Technologies, Inc.
2025-03-20 13:55 reading:204
Fibocom Fosters Local 5G AIoT Market with Newly Launched 5G Module FG370-KR at AIoT Korea 2024
  wireless communication modules, announces the launch of FG370-KR, a regional version of the FG370 series module, which is positioned to accelerate the commercial development of Korean’s 5G AIoT industries such as Fixed Wireless Access (FWA), live streaming, and industrial automation, etc. By adopting the advancements from FG370-KR, the solution allows local customers to benefit from the seamless 5G experience and fast-to-market industry solutions.  5G subscribers in South Korea reached around 33 million as of the end of March 2024, according to the latest report from Statista. SK Telecom accounted for 15.9 million of the total 5G subscribers, followed by KT with 9.9 million and LG U+ with 7.2 million. At present, the country accelerates the rollout of commercial 5G services to industry-related field and shows strong growing trends. Fibocom's 5G Sub-6GHz module FG370-KR is compatible with Korea's mainstream 5G frequency bands, supports both 5G SA and NSA network architecture, making it an ideal 5G solution for industry customers that require high-transmission speed, large capacity, and ultra-low latency.  Developed from the MediaTek T830 chipset platform, the FG370-KR is a 3GPP Release 16 compliant module that adopts a 4nm process integrated with an Arm Cortex-A55 quad-core CPU, leading to a 10% improvement in speed performance compared to the previous generation. In terms of data transmission, FG370-KR supports NR 4CA (Carrier Aggregation) with up to 300MHz bandwidth on the downlink, and NR 2CA in FDD and TDD hybrid mode on the uplink, reaches a maximum speed of up to 7.01Gbps DL and 1.25Gbps UL. In addition, it also supports PC2 of HPUE (High Power User Equipment) technology, significantly enhances 5G uplink capability and network coverage. It is worth highlighting that, FG370-KR can greatly reducing the time-to-market of customers’ devices with the support of a wide range of peripheral interfaces, including three PCI-Express, USB 3.2, two USXGMII interfaces along with software features such as Kernel, OpenWRT drivers.  “The launch of the FG370-KR signifies that Fibocom will provide a Korea-dedicated solution for local customers, boosting the 5G adoption towards a larger-scale of industries with optimal network connectivity and enhanced operational efficiency, said Simon Tao, VP of Product Management Dept., Head of MBB BU at Fibocom. “We have the confidence in helping enterprises to accomplish the 5G commercialization with our industry know-how and expertise accumulated, without doubt, Korea’s 5G deployment will keep experiencing a fast-growing rate and Fibocom will continually invest in cutting-edge 5G module solutions and delivering superior wireless experience.”  To learn more about 5G Sub-6GHz module and its demos, welcome to visit Fibocom booth #G101 on the 3rd Floor of Hall D in COEX at the AIoT Korea from October 30 to November 1 2024.
2024-12-13 10:55 reading:813
Fibocom Accelerates 5G RedCap FWA Commercialization by Offering Wi-Fi-Ready Solutions
  Shenzhen,China – November 25th 2024 – Fibocom (Stock code: 300638), a global leading provider of wireless communication modules and solutions, today debuts the ready-to-market 5G RedCap plus Wi-Fi 5/6 solution developed from the 5G RedCap module FG131, which is positioned to accelerate the commercialization of 5G FWA in the form of CPE, mobile hot-spot, and USB dongle, etc., satisfying the diverse market demands.  According to a report updated in September 2024, GSA has identified 143 operators in 61 countries and territories worldwide that have been investing in public 5G SA networks through trials, planned or actual deployments. With the implementation of 5G SA network infrastructure, 5G-enabled FWA shipments became mainstream, reaching 10.2 million in 2023. The growth of 5G FWA CPE shipments is expected to accelerate further, accounting for 42% of shipments in 2024 compared with 34% in 2023, according to the CPE Vendor Survey released by GSA in August 2024.The launch of Fibocom’s ready-to-market 5G RedCap plus Wi-Fi 5/6 solution is the ideal 5G lightweight solution accelerating the migration from 4G FWA to 5G FWA, elevating the Quality-of-Service with faster network connection, more-agile network slices services and reliability in 5G SA network environment.  Key takeaways  Advanced 5G RedCap plus Wi-Fi 6 (AX3600): The FG131 5G RedCap module integrates with a Wi-Fi 6 module developed from the Qualcomm WCN6856, reaching maximum 3600Mbps data throughput with the support of 2x2-40MHz@2.4GHz and 2x2-160MHz@5/6GHz dual-band concurrently and the support of 4K QAM for enhanced data transmission efficiency.  Medium 5G RedCap plus Wi-Fi 6 (AX1800): The FG131 5G RedCap module integrates with a Wi-Fi 6 module developed from the Qualcomm QCA2064, reaching maximum 1800Mbps data throughput with the support of 2x2-40MHz@2.4GHz and 2x2-80MHz@5/6GHz dual-band concurrently.  Entry-level 5G RedCap plus Wi-Fi 5: The FG131 5G RedCap module integrates with a Wi-Fi module developed from the Qualcomm QCA6174 through a serial port, delivers maximum 867Mbps speed with the support of dual-band 2.4GHz and 5GHz simultaneously.  Leveraging 5G SA network coverage, optimized power-saving, and reduced complexity, 5G RedCap is gaining more and more attention within the IoT industry. The Fibocom5G RedCap module FG131 offers a high-performance and ultra-reliable wireless solution for application scenarios that are cost-sensitive and power-enduring. Packaged in LGA form factor at the size of 37mm*39.5mm, Fibocom FG131 is pin-compatible with Fibocom LTE Cat 6 module FG101 and FG621 series that allows smooth migration from 4G to 5G RedCap. Compliant with 3GPP Release 17, it supports 5G SA and reaches peak rates of up to 223Mbps downlink and 123Mbps uplink theoretically. With these key features combined, the Fibocom 5G RedCap module FG131 series delivers a new level of 5G network experience while maintaining high reliability and cost-effectiveness, especially for terminal devices used in mobile scenarios. Apart from the hardware optimization, FG131also supports the OpenCPU and OpenWRT software features and an abundant of rich interfaces to realize the flexible and easy integration of FWA devices.
2024-12-11 13:26 reading:661
Fibocom Drives the Rapid Growth in the Economics of IoT Scale with Ultra-compact size Cat 1 bis Module MC610-GL at MWC Shanghai 2024
  Fibocom (Stock code: 300638), a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, announces the new member of its LTE Cat 1 bis module portfolio featuring high reliability, ultra-compact size and cost-effectiveness at MWC Shanghai 2024. The MC610-GL is positioned to foster the economics of IoT scale in vertical markets across asset tracking, E-mobility, AMI (Advanced Metering Infrastructure), etc.  The Global Cellular IoT Module market shows a 7% year-over-year (YoY) growth in Q1 2024, according to the latest reports by IoT Analytics. Despite ongoing inventory and demand issues in several other regions globally, technologies like 5G and LTE Cat-1 bis have seen a combined market growth of 67% year-over-year, signifying their substantial contribution to the cellular IoT module market's overall growth. “The statistics have verified Cat 1 bis’ driving forces in bringing affordable and reliable wireless connectivity service to a diversified IoT landscape, even though 5G remains strong performance in the data-intensive scenarios, and Cat 1 bis takes the lead in the mainstream low and medium speed market thanks to the worldwide 4G infrastructure,” said Kevin Guan, Director of MTC Product Marketing at Fibocom. “Without a doubt, we are optimistic in expanding the utilization of Cat 1 bis technology in segment areas and providing the value-added reference design service to industry customers. Looking forward, the MC610-GL is expected to address its top performance in the global market and accelerate the large-scale IoT deployment worldwide.”  Developed from the UNISOC 8910DM platform, the MC610-GL supports major carrier frequency bands worldwide and complies with rich network standards, thus ensuring uninterrupted wireless connection anywhere, anytime, especially catering to asset tracking scenarios. It adopts an ultra-compact LCC+LGA form factor design measured at 24.2 x 26.2 x 2.1mm with dual-mode (4G+2G) supported, providing great convenience for customers to switch from LTE Cat M to Cat 1 bis at the minimum investment. Equipped with rich standard interfaces, the module empowers a wide range of low-to-medium speed IoT industries with up to 10Mbps downlink data transmission rate while conserving significant cost. Leveraging the industry capabilities within Fibocom, customers are catered to the reference design service and support, reducing the lead time to market. In addition, regional versions for EMEA (MC610-EU) and Latin America (MC610-LA) are flexibly adjustable in request to customers’ cost concerns.
2024-07-03 13:57 reading:626
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
TL431ACLPR Texas Instruments
BD71847AMWV-E2 ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
model brand To snap up
BP3621 ROHM Semiconductor
BU33JA2MNVX-CTL ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
TPS63050YFFR Texas Instruments
STM32F429IGT6 STMicroelectronics
ESR03EZPJ151 ROHM Semiconductor
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 weixin Service Account AMEYA360 weixin Service Account
AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below:

verification code