Ameya360丨GigaDevice launches High-Performance Power IC

Release time：2023-01-29
author：Ameya360
source：网络
reading：2742

　　GigaDevice launches High-Performance Power IC.High-performance power IC is the cornerstone of all electronic products. GigaDevice is committed to providing customers with various regulated power supply solutions with low noise, low power consumption, high sensitivity and high efficiency, and continues to expand its products.

Ameya360丨GigaDevice launches High-Performance Power IC

　　At present, we have a variety of low-noise, low-dropout linear regulators (LDO), which can provide 3A or 1.2A load current with a maximum voltage drop of only 180mV. Combining low noise, high power supply rejection ratio and high output circuit performance, integrated undervoltage lockout, soft start control and multiple protection functions, not only suitable for wireless infrastructure and industrial applications, but also for high-speed communications, radio frequency, medical, etc. Demand for noise-sensitive areas.

　　The output voltage setting of the device can be realized by two methods: internal pin setting and external resistance setting, in some special applications of integrated circuit (ASIC), field programmable gate array (FPGA) and digital signal processor (DSP) In the scene, the required low input and low output state can be realized through BIAS input.


（"Note: The information presented in this article is gathered from the internet and is provided as a reference for educational purposes. It does not signify the endorsement or standpoint of our website. If you find any content that violates copyright or intellectual property rights, please inform us for prompt removal."）

Previous：Ameya360:Global PC Shipments Down 28% in 4Q 2022

Next：OMRON Announces Representative Directors Changes

Online messageinquiry

reading
GigaDevice's Dual-Power Supply SPI NOR Flash for 1.2V SoCs Halves Read Power Consumption
Trade news

GigaDevice's Dual-Power Supply SPI NOR Flash for 1.2V SoCs Halves Read Power Consumption

　　GigaDevice, a leading semiconductor company specializing in flash Memory, 32-bit microcontrollers (MCUs), sensors, analog products and solutions, has unveiled the GD25NE series of dual-power supply SPI NOR Flash, designed specifically for 1.2 V system-on-chip (SoC) applications.　　The GD25NE series strengthens GigaDevice's strategic dual-power supply Flash roadmap, providing seamless compatibility with next-generation 1.2 V SoCs and eliminating the need for an external booster circuit. With its higher performance and lower power consumption, the GD25NE series addresses the growing demand for advanced embedded storage, making it an ideal choice for wearable devices, healthcare, IoT, data center and Edge AI applications.　　Combining a 1.8 V core voltage with a 1.2 V I/O interface voltage, GD25NE supports single, dual, quad STR (single transfer rate) and quad DTR (double transfer rate) operation. It achieves high-speed clock frequencies of up to 133 MHz in STR mode and 104 MHz in DTR mode.　　With a typical page program time of 0.15ms and sector erase time of 30ms, the GD25NE series significantly outperforms conventional 1.2 V-only Flash solutions—offering up to 20% faster read performance, over 60% faster program speed, and 30% reduction in erase time. Due to these advances, it makes the GD25NE series an outstanding choice for emerging embedded applications.　　The GD25NE series is engineered with ultra-low power consumption by design, making it ideal for energy-sensitive applications. It features a typical deep power-down current of just 0.2 µA, a Quad I/O DTR read current of 9mA at 104 MHz, and program/erase currents as low as 8 mA. Compared to conventional 1.8 V solutions, the 1.2 V design reduces power consumption by up to 50%. This optimized power architecture not only enhances power efficiency but also simplifies system design while maintaining higher performance.　　“The GD25NE series represents a new class of dual-supply SPI NOR Flash, delivering an optimal balance of high performance and ultra-low power consumption," said Ruwei Su, GigaDevice vice president and general manager of Flash BU, "With significantly reduced power usage, faster read speeds, and enhanced program/erase efficiency, this solution is designed to meet the evolving demands of next-generation 1.2 V SoCs. As part of our ongoing commitment to innovation, we continue to expand our portfolio, providing customers with more efficient, reliable, and future-ready Flash solutions for new leading-edge applications”
2025-03-12 10:59 reading：387
GigaDevice GD25/55 Serial NOR Flash Automotive-Grade Product Family Certified for ISO 26262 ASIL D
Trade news

GigaDevice GD25/55 Serial NOR Flash Automotive-Grade Product Family Certified for ISO 26262 ASIL D

　　GigaDevice, a leading semiconductor company specializing in Flash Memory, 32-bit Microcontrollers (MCUs), Sensors, Analog products and solutions, announced its GD25/55 SPI NOR Flash Automotive-Grade Product Family has received ISO 26262:2018 ASIL D Automotive Functional Safety certification from SGS, the world's leading Testing, Inspection and Certification company. This achievement not only strongly validates the outstanding safety performance and reliability of the GD25/55 SPI NOR Flash product in demanding automotive applications but also further solidifies the company's leadership position in the SPI NOR Flash field.　　With the exponential growth in the number of automotive electronics and electrical components, the demand for safety is becoming increasingly critical. As the internationally recognized standard for automotive functional safety, ISO 26262 aims to reduce the risks associated with automotive electronics and electrical systems and ensure the safety performance of vehicles. Under the ISO 26262 framework, the ASIL (Automotive Safety Integrity Level) classification system divides functional safety into four levels, ranging from A (lowest) to D (highest). Level D represents the highest level of safety, meaning that development processes at this level are subject to the most stringent requirements.　　GigaDevice has always maintained a focus on precision and excellence in the automotive electronics field, with product quality at the core of its business development. In terms of quality management, the company’s automotive-grade Flash aims for a 0 PPM defect rate, continuously driving quality improvements and earning widespread trust from customers. To date, global shipments have surpassed 200 million units. In terms of functional safety, GigaDevice has strengthened its process systems and personnel management, continuously enhancing its functional safety management capabilities. After achieving ISO 26262 ASIL D process certification in 2023, the company’s automotive-grade SPI NOR Flash has now also received ASIL D functional safety certification. This demonstrates that GigaDevice has established a rigorous development process for automotive-grade chips, and based on this foundation, has developed the mature capability to design products that meet functional safety standards.　　The GD25/55 SPI NOR Flash Automotive-Grade Product Family strictly adheres to the AEC-Q100 Grade 1 standard and is manufactured using 55nm/45nm process technology. It supports operating voltages of 3V, 1.8V, and a range from 1.65V to 3.6V, with capacities ranging from 2Mb to 2Gb, fully meeting the code storage requirements of automotive electronics. In terms of read/write performance, it offers single-channel, dual-channel, quad-channel, and octal-channel communication modes, with data throughput rates of up to 400MB/s, ensuring efficient data transmission. The product also boasts 100,000 erase/write cycles and a data retention period of up to 20 years. For enhanced safety, products with capacities of 64Mb and above feature built-in ECC algorithms and CRC check functions, improving reliability and extending the product's lifespan.　　Currently, GD25/55 SPI NOR Flash Automotive-Grade Product Family are widely used by numerous domestic and international automakers and Tier 1 suppliers, serving key automotive electronics applications across a range of fields including In-Vehicle Infotainment, Intelligent Cockpits, Connected Car Systems, Advanced Driver Assistance Systems (ADAS), Autonomous Driving, Battery Management System, Domain Controllers, Central Computing, Central Gateways, and Zone Control Systems.　　Ruwei Su, GigaDevice Vice President and General Manager of Flash BU, stated: “As a critical medium for storing key code in automotive electronics, the functional safety of NOR Flash is essential to ensure the reliability and integrity of data in extreme environments, directly impacting the safety and stable operation of vehicles. GigaDevice GD25/55 SPI NOR Flash Automotive-Grade Product Family has obtained the ISO 26262:2018 ASIL D automotive functional safety certification, which fully demonstrates the company's strong capabilities in automotive-grade chip design. Moving forward, GigaDevice will continue to uphold high standards of automotive functional safety, strictly adhere to relevant process specifications, and provide global customers with more high-quality, highly reliable automotive-grade storage products.”
2024-12-17 16:03 reading：861
GigaDevice GD32F30x Software Test Library (STL) Achieves TÜV Rheinland IEC 61508 Functional Safety Certification
Trade news

GigaDevice GD32F30x Software Test Library (STL) Achieves TÜV Rheinland IEC 61508 Functional Safety Certification

　　GigaDevice, a leading semiconductor company specializing in Flash Memory, 32-bit Microcontrollers (MCUs), Sensors, and Power Management technologies announced that its GD32F30x Software Test Library (STL) has received IEC 61508 SC3 (SIL 2/SIL 3) functional safety certification from TÜV Rheinland. This certification follows the earlier certification of the GD32H7 Software Test Library (STL), demonstrating that GigaDevice has established a comprehensive presence in the field of functional safety. The company now offers software test libraries for both high-performance Arm® Cortex®-M7 core MCUs and mainstream Arm® Cortex®-M4 core MCUs, providing users with a broader range of product options for industrial applications. These achievements highlight GigaDevice’s commitment to product safety and reliability, as well as its expertise and advancements in the field of functional safety.　　The GD32F30x STL software test library is designed to ensure the safe operation of the GD32F30x series MCUs. It monitors the status of core units such as the internal CPU/DPU, FPU, and MPU, and conducts regular checks on memory like SRAM and Flash to quickly identify random hardware faults. Upon detecting a fault, the GD32F30x Software Test Library (STL) immediately triggers a preset safety response mechanism, placing the MCU in a safe state, thereby mitigating potential risks and providing users with time to address and rectify system failures. Additionally, it offers comprehensive documentation, including FMEDA and safety manuals, to ensure that the product meets specific safety requirements throughout the design, development, and production processes.　　Vincent Li, GigaDevice CTO and General Manager of MCU BU, stated: "As industrial automation and intelligence continue to evolve, the importance of functional safety becomes increasingly evident. The consecutive IEC 61508 SC3 (SIL 2/SIL 3) functional safety certifications for the GD32H7 STL and GD32F30x STL demonstrate that GigaDevice has established a mature management system in the functional safety field. This is crucial for enhancing the overall competitiveness of our GD32 MCU products and enabling users to develop products that meet functional safety standards in a shorter timeframe. Meanwhile, the certification process for the GD32 MCU software test library based on the Arm® Cortex® M33 core is also progressing concurrently. We will continue to align with international standards and drive technological advancements and product upgrades.”　　Bin Zhao, General Manager Cybersecurity & Functional Safety Greater China of TÜV Rheinland stated: Congratulations to GigaDevice for once again obtaining TÜV Rheinland's STL functional safety certification! GigaDevice's steadfast commitment to functional safety reflects its dedication to stringent safety standards, which we highly commend. In the future, we will continue to uphold professional technical requirements, adhere to rigorous certification processes, and deepen our collaboration to support GigaDevice in achieving further breakthroughs in the field of functional safety.”　　About GigaDevice　　GigaDevice Semiconductor Inc. (SSE Stock Code 603986) is a global leading fabless supplier. The company was founded in April 2005 and headquartered in Beijing, China, with branch offices in many countries and regions worldwide, providing local support at customers' fingertips. Committed to building a complete ecosystem with four major product lines – Flash memory, MCU, sensor and analog – as the core driving force, GigaDevice can provide a wide range of solutions and services in the fields of industrial, automotive, computing, consumer electronics, IoT, mobile, networking and communications. GigaDevice has received the ISO26262:2018 automotive functional safety ASIL D certification, IEC 61508 functional safety production certification, as well as ISO9001, ISO14001, ISO45001, and Duns certifications. In a constant quest to expand our technology offering to customers, GigaDevice has also formed strategic alliances with leading foundries, assembly, and test plants to streamline supply chain management.
2024-11-07 14:00 reading：794
GigaDevice GD32H7 Software Test Library (STL) Achieves TÜV Rheinland IEC 61508 Functional Safety Certification
Trade news

GigaDevice GD32H7 Software Test Library (STL) Achieves TÜV Rheinland IEC 61508 Functional Safety Certification

　　GigaDevice (Stock Code: 603986), a leading semiconductor company announced today that its GD32H7 Software Test Library (STL) has received the IEC 61508 SC3 (SIL 2/SIL 3) functional safety certification from TÜV Rheinland, an international independent testing, inspection, and certification organization. This marks the first STL certification awarded by TÜV Rheinland to a Chinese semiconductor company. By adopting the GD32H7 Software Test Library (STL), users can efficiently develop industrial applications that comply with international functional safety standards. This certification attests to GigaDevice's strong capabilities in developing industrial products and supporting software, demonstrating that GigaDevice's functional safety management has reached international standards.　　The certification ceremony was attended by Vincent Li, GigaDevice CTO and General Manager of MCU BU, and Bin Zhao, General Manager Cybersecurity & Functional Safety Greater China from TÜV Rheinland, along with other representatives from both companies.　　IEC 61508 is a globally recognized foundational standard for industrial functional safety. It provides a fundamental evaluation method for the entire safety lifecycle of electrical, electronic, and programmable electronic (E/E/PE) systems and products used in safety applications. The standard comprehensively covers all aspects including functional safety management, system, hardware, software phases, support processes, safety analysis, product reliability, and product release. It aims to control the risks associated with systematic failures and random hardware failures to an acceptable level. To conclude, IEC 61508 has already become a crucial reference standard in key industries such as industrial, energy, water transport, and railways etc. Obtaining this certification is essential for entering industries that require advanced functional safety.　　With the development of digitalization and intelligent technology, the importance of functional safety is increasing in industries such as industrial automation and digital energy. The GD32H7 Software Test Library (STL) with its exceptional detection capabilities, can accurately identify random hardware faults in safety-critical components like CPUs, SRAM, and Flash. This helps users flexibly utilize the GD32H7 series of ultra-high performance MCUs in developing complex computations, multimedia technologies, edge AI, and other advanced applications, significantly reducing safety risks. And the GD32H7 STL can be widely applicable to various end-user scenarios and can guarantee the reliability and safety of industrial applications. Besides, the Software Test Library will also be compatible with the GD32MCU that uses the same Arm® Cortex® M7 core. Furthermore, GigaDevice is actively advancing the certification of Software Test Library based on Arm® Cortex® M4 and Arm® Cortex® M33 cores, with plans to release soon. The significant initiatives will further strengthen GigaDevice's technological advantages in functional safety and meet the safety needs of various industry applications.　　Vincent Li, GigaDevice CTO and General Manager of MCU BU, stated: "GigaDevice is unwavering in the commitment to excellence in quality, adopting a quality policy that involves full employee participation and entire product lifecycle coverage. The industrial sector is an important strategic focus for us, where we place significant emphasis on the functional safety of products and applications. We are deeply appreciative to the professional team at TÜV Rheinland for their assistance and recognition. Obtaining IEC 61508 SC3 (SIL 2/SIL 3) certification is a significant milestone for GigaDevice in functional safety management. It will greatly enhance the safety and ease of developing industrial applications for our users. In the future, we plan to progressively integrate this international standard to a broader product line, continuously reinforcing the reliability of our products and software, while driving the advancement of industry functional safety standards."　　Bin Zhao, General Manager Cybersecurity & Functional Safety Greater China of TÜV Rheinland stated: "Congratulations to GigaDevice for becoming the first Chinese semiconductor company to receive the TÜV Rheinland STL certification! As an international third-party certification organization with a 150-year history, TÜV Rheinland is dedicated to providing technical support for the quality and safety of products and systems. During the project, our technical experts conducted a comprehensive safety verification of the GD32H7 STL throughout its lifecycle with a meticulous and responsible approach. We are very pleased to see that GigaDevice has met international standards in functional safety. In the future, we will continue to strengthen our collaboration to enhance the safety and reliability of GigaDevice's products, aiming to build outstanding market competitiveness."
2024-08-19 15:48 reading：1167
Popular categories
Boxes, Enclosures, Racks Cables, Wires Circuit Protection Connectors, Interconnects Development Kits Electromechanical Embedded Solutions Fans, Thermal Management Optoelectronics Others Passive Components Power Semiconductors Sensors, Transducers Test and Measurement
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
TL431ACLPR Texas Instruments
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
model brand To snap up
IPZ40N04S5L4R8ATMA1 Infineon Technologies
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
Original authorized brand
More Licensed Brands>>
Information leaderboard
  • Week of ranking
  • Month ranking

About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 weixin Service Account AMEYA360 weixin Service Account
AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below：

verification code