IBM Power 9 Servers Target AI-Ameya360电子元器件采购网

IBM Power 9 Servers Target AI

发布时间：2017-12-06 00:00

作者：Ameya360

来源：Rick Merritt

阅读量：1121

　　IBM announced its first Linux servers to use its Power 9 processors, targeting businesses that want to accelerate machine learning jobs. The systems are the first to use PCI Express Gen 4 as well as NVLink 2.0 to attach Nvidia GPUs and IBM’s OpenCAPI for FPGAs and other accelerators.

　　The company claims it will approach the prices of rival x86 systems while delivering greater bandwidth. However, it’s unclear what accelerators will be available for the new interconnects.

　　The NVLink 2.0 attaches up to six Nvidia GPUs to a Power 9 system delivering 5.6 times the bandwidth of the PCIe Gen 3 links used on x86 server, IBM claimed. The additional bandwidth translates to about 3.7-times speed up on machine learning jobs using frameworks such as Chainer or Caffe, it said.

　　IBM provides optimized versions of AI frameworks that can distribute compute-intensive training jobs across hundreds of GPUs with 95 percent scaling, it added.

　　The company expects partners will provide FPGAs and NAND flash drives for its PCIe Gen 4 slots. It has demonstrated systems with the Mellanox Innova 2 Ethernet/FPGA card which has not yet announced its general availability date.

　　Xilinx has a prototype FPGA working on the OpenCAPI link. The interface is based on standard serdes to ease porting for logic chips as well as future storage-class memories, however, IBM gave no other examples of chips planned for the interconnect.

　　“I think IBM will continue to face issues of ecosystem support. They have Nvidia, but I haven’t seen a whole lot of people rushing to OpenCAPI,” said Nathan Brookwood, principal of market watcher Insight64.

　　“In servers, it’s still Intel’s party, and it’s been hard for anybody else to crash that party. It’s much easier for someone like AMD. You don’t have to change a line of software as opposed to IBM and ARM servers that require software changes that are always problematic,” Brookwood said.

　　“IBM is clearly the first to use PCI Express Gen 4, but I don’t know if that’s going to make a huge difference in this generation, and next year others will be there too. So, it’s hard to see how they will make much progress against the Intel juggernaut,” he added.

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

Trade news

IBM: Copper Interconnects Here to Stay

　　When aluminum interconnects became too slow for complementary metal oxide semiconductors (CMOS) at the 180 nanometer node, IBM led the way to the now universally used copper interconnects starting in 1997.　　Now, on its 20th anniversary, many other interconnects are being proposed to replace copper, notably graphene. IBM, however, claims that slight tweaks to copper deposition will give it an enduring edge all the way to the end of the road for CMOS.　　Big Blue is touting "copper forever" at the IEEE Nanotechnology Symposium this week in Albany, with more details expected to be revealed at the IEEE International Electronic Devices Meeting (IEDM) in San Francisco.　　"Graphene is not readily manufacturable, and furthermore end-to-end comparisons show graphene does not flow uniformly and can't achieve the low resistances of enhanced copper interconnects," IBM Fellow Dan Edelstein told EE Times in an exclusive preview of his Nanotechnology Symposium talk.　　"Copper with a thin cap of cobalt is better than graphene at carrying current and even at the smallest sizes imaginable copper interconnects are still the best solution, perhaps with cobalt, nickel, ruthenium or another platinum-group noble metals brought in to underlay it," Edelstein said.　　Initial IBM studies showed that copper had 40 percent less resistance than aluminum, resulting in an immediate 15 percent burst in processor speeds. Plus, copper is more durable and 100 times more reliable, according to IBM.　　But the industry in the 1990s expressed two big resistances to the changeover to copper — both surmounted by IBM. The first was the fact that copper "poisons" silicon when it comes into direct contact. That was solved by encasing copper in tantalum-nitride and tantalum in a diffusion barrier all around.　　The second was its deposition method. Aluminum was previously fabricated as interconnects by depositing an even layer on a topping of dielectric with vias down to the silicon, after which it was etched. Since copper had to be encased in the tantalum compound, this substrative method was not possible. Instead, IBM came up with an additive method with the kind of electroplating used for printed-circuit boards (PCBs).　　Electroplating had never before been used on CMOS chips, so stumped the rest of the industry until IBM shared its discovery of it and the encasing process to prevent copper poisoning of the underlying CMOS circuitry. The most complicated part of the process, however, was the dual-damascene process of electroplating inside deep trenches, enabling from seven to 17 (then and today, respectively) metal layers to interconnect the single layer of silicon transistors on typical planar chip. And then there was the "magic."　　"We discovered that copper's 'magic' was that in the process of preparing it, trace impurities vastly improved its reliability," Edelstein told EE Times. "Our electroplated copper had minimal electro-migration [the bane of interconnections in microelectronics] because of these traces of carbon, nitrogen, sulfur, chlorine and phosphorus, all of which were present in as little as 10 parts per million."　　Cyprian Uzoh, the chemist on the team (whose name in his native Nigerian language means “copper”) came up with the electroplated copper "recipe" and said at the time of the impurities that "a little salt and pepper never hurt anybody."　　"I firmly believe that the discovery of the superior, cheaper and easier interconnection of CMOS transistors with copper instead of aluminum resulted from IBM Research's multi-disciplinary expertise across chemistry, electrical engineering and physics," Edelstein told EE Times. "Plus, we built our own PCBs, chips and their packaging, which together gave us the expertise to discover how electroplating copper could replace aluminum. All our competitors sub-contracted many of these steps, putting IBM in the unique position to solve the puzzle."　　The dual damascene process, for instance, essentially added silicon dioxide as insulation between layers while simultaneously permitting the tantalum-coated copper wires to be electroplated into the chips trenches. These techniques depended on multidisciplinary expertise, enabling IBM to produce the first prototypes in 1997 and the first production PowerPC chips in 1998. When compared to the previous generation 300-MHz PowerPCs, the 1998 versions experienced a 33 percent boost in speed attributable to their unique copper interconnect. And putting the rest of the industry on the trail to figure out how IBM was doing it.　　"At first our competitors said that it would only last one generation, but so far it has lasted 12. And we believe that for CMOS it will last forever, except perhaps on the bottom layer next to the advanced node silicon transistors which may require cobalt, nickel, ruthenium or another platinum-group noble metals," Edelstein told EE Times.

2017-11-16 00:00 阅读量：1782

型号	品牌	询价
CDZVT2R20B	ROHM Semiconductor
BD71847AMWV-E2	ROHM Semiconductor
MC33074DR2G	onsemi
RB751G-40T2R	ROHM Semiconductor
TL431ACLPR	Texas Instruments

型号

品牌

询价

ROHM Semiconductor

ROHM Semiconductor

onsemi

ROHM Semiconductor

Texas Instruments

型号	品牌	抢购
ESR03EZPJ151	ROHM Semiconductor
BP3621	ROHM Semiconductor
STM32F429IGT6	STMicroelectronics
TPS63050YFFR	Texas Instruments
BU33JA2MNVX-CTL	ROHM Semiconductor
IPZ40N04S5L4R8ATMA1	Infineon Technologies

型号

品牌

抢购

ROHM Semiconductor

ROHM Semiconductor

STMicroelectronics

Texas Instruments